BS EN 764-3-2002 pressure equipment Part 3 Definition of parties involved
|
ID： |
D3AA6074EA3D47DABA087D88FDA18731 |
|
文件大小(MB)： |
0.12 |
|
页数： |
8 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,764-3:2002,Pressure equipment —,Part 3: Definition of parties involved,The European Standard EN 764-3:2002 has the status of a,British Standard,ICS 01.040.23; 23.020.30,NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW,BS EN 764-3:2002,This British Standard, having,been prepared under the,direction of the Engineering,Sector Policy and Strategy,Committee, was published,under the authority of the,Standards Policy and Strategy,Committee on 13 June 2002,. BSI 13 June 2002,ISBN 0 580 39864 1,National foreword,This British Standard is the official English language version of,EN 764-3:2002.,The UK participation in its preparation was entrusted to Technical Committee,PVE/1, Pressure vessels, which has the responsibility to:,A list of organizations represented on this committee can be obtained on,request to its secretary.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Catalogue,under the section entitled “International Standards Correspondence Index”, or,by using the “Search” facility of the BSI Electronic Catalogue or of British,Standards Online.,This publication does not purport to include all the necessary provisions of a,contract. Users of this publication are responsible for their correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,— aid enquirers to understand the text;,— present to the responsible international/European committee any,enquiries on the interpretation, or proposals for change, and keep the,UK interests informed;,— monitor related international and European developments and,promulgate them in the UK.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 5 and a back cover.,The BSI copyright date displayed in this document indicates when the,document was last issued.,Amendments issued since publication,Amd. No. Date Comments,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 764-3,May 2002,ICS 01.040.23; 23.020.30,English version,Pressure equipment - Part 3: Definition of parties involved,Equipements sous pression - Partie 3: Définition des,parties impliquées,Druckger鋞e - Teil 3: Definition der beteiligten Parteien,This European Standard was approved by CEN on 29 April 2002.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Management Centre or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2002 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 764-3:2002 E,EN 764-3:2002 (E),2,Contents,page,Foreword3,1 Scope .4,2 Terms and definitions..4,EN 764-3:2002 (E),3,Foreword,This document EN 764-3:2002 has been prepared by Technical Committee CEN/TC 54 "Unfired pressure vessels",the secretariat of which is held by BSI.,This European Standard shall be given the status of a national standard, either by publication of an identical text or,by endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latest,by November 2002.,This document has been prepared under a mandate given to CEN by the European Commission (EC) and the,European Free Trade Association,This European Standard consists of seven parts which are:,Part 1 Definitions of pressure, temperature and volume;,Part 2 Quantities, symbols and units;,Part 3 Definition of parties involved;,Part 4 Establishment of technical delivery conditions for metallic materials;,Part 5 Inspection documentation of metallic materials and compliance with the material specification;,Part 6 Operating instructions;,Part 7 Safety systems for unfired pressure e……
……